System messages

This is a list of system messages available in the MediaWiki namespace. Please visit MediaWiki Localisation and translatewiki.net if you wish to contribute to the generic MediaWiki localisation.First pagePrevious pageNext pageLast page

Name	Default message text
	Current message text
apierror-stashedit-missingtext (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	No stashed text found with the given hash.
apierror-stashexception (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	$1
apierror-stashfailed-complete (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Chunked upload is already completed, check status for details.
apierror-stashfailed-nosession (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	No chunked upload session with this key.
apierror-stashfilestorage (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Could not store upload in the stash: $1
apierror-stashinvalidfile (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Invalid stashed file.
apierror-stashnosuchfilekey (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	No such filekey: $1.
apierror-stashpathinvalid (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	File key of improper format or otherwise invalid: $1.
apierror-stashwrongowner (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Wrong owner: $1
apierror-stashzerolength (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	File is of zero length, and could not be stored in the stash: $1.
apierror-systemblocked (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	You have been blocked automatically by MediaWiki.
apierror-templateexpansion-notwikitext (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Template expansion is only supported for wikitext content. $1 uses content model $2.
apierror-tempuseracquirefailed (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unable to acquire a temporary account username.
apierror-tempuserdisabled (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Temporary user account creation is disabled.
apierror-toofewexpiries (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	$1 expiry {{PLURAL:$1|timestamp was|timestamps were}} provided where $2 {{PLURAL:$2|was|were}} needed.
apierror-toomanyvalues (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Too many values supplied for parameter <var>$1</var>. The limit is $2.
apierror-unknownaction (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	The action specified, <kbd>$1</kbd>, is not recognized.
apierror-unknownerror (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unknown error: "$1".
apierror-unknownerror-editpage (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unknown EditPage error: $1.
apierror-unknownerror-nocode (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unknown error.
apierror-unknownformat (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unrecognized format "$1".
apierror-unrecognizedparams (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unrecognized {{PLURAL:$2|parameter|parameters}}: $1.
apierror-unrecognizedvalue (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Unrecognized value for parameter <var>$1</var>: $2.
apierror-unsupportedrepo (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Local file repository does not support querying all images.
apierror-upload-filekeyneeded (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Must supply a <var>filekey</var> when <var>offset</var> is non-zero.
apierror-upload-filekeynotallowed (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Cannot supply a <var>filekey</var> when <var>offset</var> is 0.
apierror-upload-inprogress (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Upload from stash already in progress.
apierror-upload-missingresult (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	No result in status data.
apierror-urlparamnormal (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Could not normalize image parameters for $1.
apierror-writeapidenied (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	You're not allowed to edit this wiki through the API.
apihelp (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	API help
apihelp-acquiretempusername-extended-description (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	If the user later performs an action that results in temp account creation, the stashed username will be used for their account. It may also be used in previews. However, the account is not created yet, and the name is not visible to other users.
apihelp-acquiretempusername-summary (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Acquire a temporary user username and stash it in the current session, if temp account creation is enabled and the current user is logged out. If a name has already been stashed, returns the same name.
apihelp-block-example-ip-simple (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Block IP address <kbd>192.0.2.5</kbd> for three days with a reason.
apihelp-block-example-user-complex (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Block user <kbd>Vandal</kbd> indefinitely with a reason, and prevent new account creation and email sending.
apihelp-block-param-actionrestrictions (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	List of actions to block the user from performing. Only applies when <var>partial</var> is set to true.
apihelp-block-param-allowusertalk (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Allow the user to edit their own talk page (depends on <var>[[mw:Special:MyLanguage/Manual:$wgBlockAllowsUTEdit|$wgBlockAllowsUTEdit]]</var>).
apihelp-block-param-anononly (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Block anonymous users only (i.e. disable anonymous edits for this IP address, including temporary account edits).
apihelp-block-param-autoblock (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Automatically block the last used IP address, and any subsequent IP addresses they try to login from.
apihelp-block-param-expiry (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Expiry time. May be relative (e.g. <kbd>5 months</kbd> or <kbd>2 weeks</kbd>) or absolute (e.g. <kbd>2014-09-18T12:34:56Z</kbd>). If set to <kbd>infinite</kbd>, <kbd>indefinite</kbd>, or <kbd>never</kbd>, the block will never expire.
apihelp-block-param-hidename (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Hide the username from the block log. (Requires the <code>hideuser</code> right).
apihelp-block-param-id (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	The block ID to modify.
apihelp-block-param-namespacerestrictions (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	List of namespace IDs to block the user from editing. Only applies when <var>partial</var> is set to true.
apihelp-block-param-newblock (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Add another block even if the user is already blocked.
apihelp-block-param-nocreate (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Prevent account creation.
apihelp-block-param-noemail (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Prevent user from sending email through the wiki. (Requires the <code>blockemail</code> right).
apihelp-block-param-pagerestrictions (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	List of titles to block the user from editing. Only applies when <var>partial</var> is set to true.
apihelp-block-param-partial (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Block user from specific pages or namespaces rather than the entire site.
apihelp-block-param-reason (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	Reason for block.
apihelp-block-param-reblock (𐌲𐌰𐍅𐌰𐌿𐍂𐌳𐌹) (𐌲𐌰𐍃𐌺𐌴𐌹𐍂𐌴𐌹)	If the user is already blocked by a single block, overwrite the existing block. If the user is blocked more than once, this will fail—use the <var>id</var> parameter instead to specify which block to overwrite.

First pagePrevious pageNext pageLast page